AH500 Operation Manual 12-8 Error Description Remedy code 16#2007 The operands used in ZRST are not used properly. (SM5) Check the program, compile the program again, and download the program again. 16#200A Invalid instruction (SM5) Check the program, compile the program again, and download the program again. 16#200B The operand n or the other constant operands exceed the range. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#200C The operands overlap. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#200D An error occurs when the binary number is converted into the binary-coded decimal number.
(SM0/SM5) Check the program, compile the program again, and download the program again. 16#200E The string does not end with 0x00. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#200F The instruction does not support the modification by an index register. (SM5) Check the program, compile the program again, and download the program again. 16#2010 1. The instruction does not support the device. 2. Encoding error 3. The instruction is a 16-bit instruction, but the constant operand is a 32-bit code. (SM5) Check the program, compile the program again, and download the program again. 16#2011 The number of operands is incorrect.
(SM5) Check the program, compile the program again, and download the program again. 16#2012 Incorrect division operation (SM0/SM5). Check the program, compile the program again, and download the program again. 16#2013 The value exceeds the range of values which can be represented by the floating-point numbers. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#2014 The task designated by TKON/TKOFF is incorrect, or exceeds the range. (SM5) Check the program, compile the program again, and download the program again. 16#2015 There are more than 32 levels of nested program structures supported by CALL.
(SM0) Check the program, compile the program again, and download the program again. 16#2016 There are more than 32 levels of nested program structures supported by FOR/NEXT. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#2017 The number of times FOR is used is different from the number of times NEXT is used. (SM5) Check the program, compile the program again, and download the program again. 16#2018 There is a label after FEND, but there is no SRET. There is SRET, but there is no label. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again.
16#2019 The interrupt task is not after FEND. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again.