Delta Electronics AH500 — 12.2.6 Others

Chapter 12 Troubleshooting 12-25 Error Description Remedy code 16#9A50 There is no response from slave 16 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 16. 2. Check the communication cable. 16#9A51 There is no response from slave 17 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 17. 2. Check the communication cable. 16#9A52 There is no response from slave 18 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 18. 2. Check the communication cable.

16#9A53 There is no response from slave 19 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 19. 2. Check the communication cable. 16#9A54 There is no response from slave 20 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 20. 2. Check the communication cable. 16#9A55 There is no response from slave 21 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 21. 2. Check the communication cable. 16#9A56 There is no response from slave 22 in the PLC Link. (SM1592) 1.

Check the communication setting in the master, and the communication setting in slave 22. 2. Check the communication cable. 16#9A57 There is no response from slave 23 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 23. 2. Check the communication cable. 16#9A58 There is no response from slave 24 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 24. 2. Check the communication cable. 16#9A59 There is no response from slave 25 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 25. 2.

Check the communication cable. 16#9A5A There is no response from slave 26 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 26. 2. Check the communication cable. 16#9A5B There is no response from slave 27 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 27. 2. Check the communication cable. 16#9A5C There is no response from slave 28 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 28. 2. Check the communication cable. 16#9A5D There is no response from slave 29 in the PLC Link. (SM1592) 1.

Check the communication setting in the master, and the communication setting in slave 29. 2. Check the communication cable. 16#9A5E There is no response from slave 30 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 30. 2. Check the communication cable. 16#9A5F There is no response from slave 31 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 31. 2. Check the communication cable. 16#9A60 There is no response from slave 32 in the PLC Link. (SM1592) 1. Check the communication setting in the master, and the communication setting in slave 32. 2.

Check the communication cable. 16#9A61 The setting of the PLC Link mode is incorrect. (SM1589) Make sure that SM1586 and SM1587 are not both ON.