Delta Electronics AH500 — 12.2.6 Others

AH500 Operation Manual 12-26 Error Description Remedy code 16#9A62 The number of polling cycles in the PLC Link is incorrect. (SM1592) If the PLC Link is in the manual mode, please make sure that the number of polling cycles is within the range between 1 and 65535. 16#9A63 There is a handshaking timeout when the CPU module establishes a connection with the network module. (SM1596) Check whether the network module operates normally. 16#9A64 There is no network module parameter in the CPU module. (SM1596) Download the parameter in HWCONFIG again. 16#9B21 An error occurs when COM2 communicates with slave 1 by Modbus. 1.

Check the communication setting in the master, and the communication setting in slave 1. 2. Check the communication cable. 16#9B22 An error occurs when COM2 communicates with slave 2 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 2. 2. Check the communication cable. 16#9B23 An error occurs when COM2 communicates with slave 3 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 3. 2. Check the communication cable. 16#9B24 An error occurs when COM2 communicates with slave 4 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 4. 2.

Check the communication cable. 16#9B25 An error occurs when COM2 communicates with slave 5 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 5. 2. Check the communication cable. 16#9B26 An error occurs when COM2 communicates with slave 6 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 6. 2. Check the communication cable. 16#9B27 An error occurs when COM2 communicates with slave 7 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 7. 2. Check the communication cable. 16#9B28 An error occurs when COM2 communicates with slave 8 by Modbus. 1.

Check the communication setting in the master, and the communication setting in slave 8. 2. Check the communication cable. 16#9B29 An error occurs when COM2 communicates with slave 9 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 9. 2. Check the communication cable. 16#9B2A An error occurs when COM2 communicates with slave 10 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 10. 2. Check the communication cable. 16#9B2B An error occurs when COM2 communicates with slave 11 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 11. 2.

Check the communication cable. 16#9B2C An error occurs when COM2 communicates with slave 12 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 12. 2. Check the communication cable. 16#9B2D An error occurs when COM2 communicates with slave 13 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 13. 2. Check the communication cable. 16#9B2E An error occurs when COM2 communicates with slave 14 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 14. 2. Check the communication cable.