Chapter 6 Applied Instructions Additional remark: 1. If D ~ D + n -1 exceed the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If the operand n used in the 16-bit instruciton is larger than 256 or less than 1, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If the operand n used in the 32-bit instruciton is larger than 128 or less than 1, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 6-125