AH500 Programming Manual 2-46 Limited Special auxiliary Refresh time to relay SM1128 SM1128 is ON when the trigger is enabled and no mail has been sent. SM1129 SM1129 is ON when the trigger is enabled and the last mail has been sent successfully. SM1130 SM1130 is ON when the trigger is enabled and the last mail has been sent in error. SM1131 SM1131 is ON when the trigger is enabled and the mail has been sent. SM1132 SM1132 is ON when the trigger is enabled and there is an SMTP server response timeout. SM1133 SM1133 is ON when the trigger is enabled and there is an SMTP server response error. SM1134 SM1134 is ON when the trigger is enabled and the size of the attachment exceeds the limit.
SM1135 SM1135 is ON when the trigger is enabled and the attachment is not found. SM1136 SM1136 is ON when the trigger of the PLC parameter is enabled. SM1137 SM1137 is ON when the trigger of the PLC parameter is triggered. SM1138 SM1138 is ON when the trigger is enabled and no mail has been sent. SM1139 SM1139 is ON when the trigger is enabled and the last mail has been sent successfully. SM1140 SM1140 is ON when the trigger is enabled and the last mail has been sent in error. SM1141 SM1141 is ON when the trigger is enabled and the mail has been sent. SM1142 SM1142 is ON when the trigger is enabled and there is an SMTP server response timeout.
SM1143 SM1143 is ON when the trigger is enabled and there is an SMTP server response error. SM1144 SM1144 is ON when the trigger is enabled and the size of the attachment exceeds the limit. SM1145 SM1145 is ON when the trigger is enabled and the attachment is not found. SM1146 SM1146 is ON when the trigger of the PLC parameter is enabled. SM1147 SM1147 is ON when the trigger of the PLC parameter is triggered. SM1148 SM1148 is ON when the trigger is enabled and no mail has been sent. SM1149 SM1149 is ON when the trigger is enabled and the last mail has been sent successfully. SM1150 SM1150 is ON when the trigger is enabled and the last mail has been sent in error.
SM1151 SM1151 is ON when the trigger is enabled and the mail has been sent. SM1152 SM1152 is ON when the trigger is enabled and there is an SMTP server response timeout. SM1153 SM1153 is ON when the trigger is enabled and there is an SMTP server response error. SM1154 SM1154 is ON when the trigger is enabled and the size of the attachment exceeds the limit. SM1155 SM1155 is ON when the trigger is enabled and the attachment is not found.