AL-C300 Series User's Guide Troubleshooting Troubleshooting The printer is canceling the specified print job and the current print job. This message appears when Cancel Job is selected after you specify the file to be canceled on the control panel. Checking Printer Status Can’t Print The print data is deleted because it is incorrect. Status and error messages on the control panel Make sure the appropriate paper size and printer driver are used. If you are printing from USB memory, make sure the file is normal and not corrupted. This section describes the messages and the meaning of the messages that appear on the LCD panel.
Can’t Print Duplex (AL-C300DN only) When the mark is displayed at the right of the warning message, multiple warnings have occurred. Pressing the u Up or d Down buttons displays the warnings. The printer has encountered problems during duplex printing. Make sure you are using an appropriate type and size of paper for the duplex printing. The problem could also be a result of incorrect settings for the paper source you are using. Pressing the OK button will print the rest of the print job on only one side of the paper. To cancel the print job, see “Cancelling a Print Job” on page 54 . Note: ❏ If l Press for help is displayed on the LCD panel, press the l Left button to show the help.
Then press the d Down button for next step, the u Up button for previous step, or l Left button to close the help. ❏ To clear a warning message, select Reset Menu in Common Settings from the control panel, then select Clear Warning . See “How to access the control panel menus” on page 15 for instructions. Can't Print Files There is no printable data in the USB memory. Can’t Use Bookmark Adjusting Printer Wait a few minutes. Do not open or close the covers, or turn off the printer until this message disappears. The registered menu cannot be used because the menu is disabled by changing any settings after registered the menu in bookmark.
Bookmark Failed CF CHECK The printer is checking the CompactFlash memory. The selected menu cannot be registered as a bookmark. Some menus cannot be registered as bookmarks. Bookmark Registered Check Duplex Paper Size (AL-C300DN only) The size of paper loaded in the printer is not available for the printer. Check to see if the correct size of paper is loaded in the specified paper source. The selected menu is registered as a bookmark. Canceling All Job To clear this warning message, select Clear Warning from the control panel’s Reset Menu . The printer is canceling all print jobs in the printer memory, including jobs the printer is currently receiving or printing.
This message appears when Cancel All Jobs is selected on the control panel. Check Media Type The paper loaded in the printer does not match the paper type setting in the printer driver. Paper that matches only the paper size setting will be used for printing. Canceling Job 60