EPSON — Status and error messages on the control panel

AL-C300 Series User's Guide Troubleshooting The toner cartridge has reached the end of its service life and need to be replaced. The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively. ROM CHECK The printer is checking the ROM. Searching Files This message appears only when Convert to Monochrome is set to On , and the black toner is still left. You can print in black-and-white by pressing the OK button. The printer is searching files in the USB memory. SELF TEST Replace Transfer Unit The printer is currently performing a self test and initialization.

The transfer unit has reached the end of its service life and needs to be replaced. Press the OK button to clear this error. Service Req Cffff/ Service Req Exxx A controller error or a print engine error has been detected. Turn off the printer. Wait at least 5 seconds, then turn it back on. If the error message still appears, write down the error number listed on the LCD panel ( Cffff / Exxx ), turn off the printer, unplug the power cord, then contact a qualified service representative. Replace Waste Toner Box The waste toner bottle has reached the end of its service life and needs to be replaced. See “Replacing Consumable Products/Maintenance Parts” on page 80 for instructions.

Reserve Job Canceled Set Paper tttt pppp The printer cannot store the data of your print job using the Reserve Job function. The maximum number of print jobs stored on the printer’s memory has been reached, or the memory has no more memory available to store a new job. To store a new print job, delete a previously stored job. Also, if you have any Confidential Job stored, printing those jobs will make more memory available. The paper loaded in the specified paper source ( tttt ) does not match the required paper type ( pppp ). Replace the loaded paper with the correct paper type and press the OK button to resume printing, or cancel the print job.

To cancel the print job, see “Cancelling a Print Job” on page 54 . If you press the OK button without replacing the paper, the printer will print on the loaded paper even though it does not match the required paper type. You may also increase the available memory space by changing the RAM Disk setting to Normal or Maximum . For details, see “Setup Menu” on page 19 . Set Paper tttt sssss To clear this warning message, select Clear Warning from the control panel’s Reset Menu . The paper loaded in the specified paper source ( tttt ) does not match the required paper size ( sssss ).

Replace the loaded paper with the correct size paper and press the OK button to resume printing, or cancel the print job. To cancel the print job, see “Cancelling a Print Job” on page 54 . Reset All All printer’s interface has been reset and the buffer has been cleared. The printer reboots automatically. If you press the OK button without replacing the paper, the printer will print on the loaded paper even though it does not match the required size. Reset to Save A control panel menu setting was changed while the printer was printing. Press the OK button to clear this message. The setting will become effective after printing has finished.

Alternatively you can clear this message by performing Reset All on the control panel. However, the print data will be deleted. Set Paper tttt ssss1 or ssss2 This message appears in the following situations if A4/ LT Auto Switching in Setup Menu is set to A4->LT , LT->A4 or A4 LT : 64