EPSON — The ready light is on but nothing prints

AL-C300 Series User's Guide Troubleshooting The Printer does not turn off The Printer Does Not Print Ready light is off and nothing prints The ready light is on but nothing prints 71 Cause What to do The printer is in the power off mode (Wakeup/Sleep button blinks) Wait for a while. The printer turns off in approximately ten seconds. To not enter the power off mode, set Power Off Timer to Off in Energy Saver Menu on the control panel. Cause What to do The printer is offline. The printer is paused by pressing the Pause/Release button. Press the Pause/Release button once to switch the printer to ready status. Make sure that the Ready light turns on. Some error may have occurred.

Check the LCD panel to see if an error message appears. The power cord may not be properly plugged into the electrical outlet. Turn off the printer, check the power cord connections between the printer and the electrical outlet, then turn the printer back on. The printer is in the power off mode (the Wakeup/ Sleep button blinks). Press the Wakeup/Sleep button to return to the status available for printing. To not enter the power off mode, set Power Off Timer to Off in Energy Saver Menu on the control panel. Cause What to do The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer and the computer.

You may not be using the correct interface cable. Use a cable that matches the specifications of the printer. Confirm that there are not breaks in the cable. If you are using the USB interface, use a cable that is compatible with Hi-Speed USB. Your application software is not properly set up for your printer. Make sure that the printer is selected in your application software. Your computer system’s memory is too small to handle the volume of data in your document. Try reducing the image resolution of your document in the application software, or install more memory in your computer if you can.