AL-C300 Series User's Guide Troubleshooting E Insert a CompactFlash memory into the slot. J Turn on the printer. If Format Required appears on the control panel, press the OK button to format the CompactFlash. To confirm that the option is installed correctly, print a configuration status sheet. See “The Printer Does Not Print” on page 71 . Note for Windows users: If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See “Printing a status sheet” on page 65 . Removing a CompactFlash memory ! Caution: F Reattach the metal cover to the printer as shown below.
Be careful when working inside the printer as some components are sharp and may cause injury. c Important: Before you remove a CompactFlash memory, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components. Perform the installation procedure in reverse. Completely erase all data using specialized software or carry out Delete All CompactFlash Data on Support Menu before you give away or discard CompactFlash memory. See “Support Menu” on page 90 . G Deleting files or formatting the CompactFlash memory from the computer may not erase the data completely.
Physically destroying the CompactFlash memory is also recommended when you discard CompactFlash memory. H below. I Reconnect the interface cable and power cord and turn the printer on. 86 Tighten the screws on the back of the printer. Pe No ❏ ❏