AL-C300 Series User's Guide Appendix 91 Item Explanation 020 Special Adjusts the print quality for special paper according to the paper type. Settings (default in bold): 0: Plain paper 1: Coated paper 1 2: Coated paper 2 051 Feed Offset Do this adjustment after you have eliminated the variation between the paper sources by 055 Feed Reg1 MP/059 Feed Reg1 C1/063 Feed Reg1 C2. This function adjusts the vertical position at which to start printing. The position moves lower on the sheet of paper as the value increases. This setting is used when doing single-sided printing or printing on the back side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ...
3.5 mm in 0.5 mm increments 052 Scan Offset Do this adjustment after you have eliminated the variation between the paper sources by 056 Scan Reg1 MP/060 Scan Reg1 C1/064 Scan Reg1 C2. This function adjusts the horizontal position at which to start printing. The position moves to the right of the sheet of paper as the value increases. This setting is used when doing single-sided printing or printing on the back side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments 053 Feed Offset2 Do this adjustment after you have eliminated the variation between the paper sources by 057 Feed Reg2 MP/061 Feed Reg2 C1/065 Feed Reg2 C2.
This function adjusts the vertical position at which to start printing. The position moves lower on the sheet of paper as the value increases. This setting is used when printing on the front side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments 054 Scan Offset2 Do this adjustment after you have eliminated the variation between the paper sources by 058 Scan Reg2 MP/062 Scan Reg2 C1/066 Scan Reg2 C2. This function adjusts the horizontal position at which to start printing. The position moves to the right of the sheet of paper as the value increases.
This setting is used when printing on the front side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments 055 Feed Reg1 MP 059 Feed Reg1 C1 063 Feed Reg1 C2 Adjusts the vertical position at which to start printing and eliminate the variation between the paper sources. The position moves lower on the sheet of paper as the value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for single-sided printing or printing on the back side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ...
3.5 mm in 0.5 mm increments 056 Scan Reg1 MP 060 Scan Reg1 C1 064 Scan Reg1 C2 Adjusts the horizontal position at which to start printing and eliminate the variation between the paper sources. The position moves to the right of the sheet of paper as the value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for single-sided printing or printing the back side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments