EPSON — Printer Adjust Menu

AL-C300 Series User's Guide Appendix 92 Item Explanation 057 Feed Reg2 MP 061 Feed Reg2 C1 065 Feed Reg2 C2 Adjusts the vertical position at which to start printing and eliminate the variation between the paper sources. The position moves lower on the sheet of paper as the value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for printing on the front side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments 058 Scan Reg2 MP 062 Scan Reg2 C1 066 Scan Reg2 C2 Adjusts the horizontal position at which to start printing and eliminate the variation between the paper sources.

The position moves to the right of the sheet of paper as the value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for printing on the front side of the sheet of paper for duplex printing. Settings (default in bold): -3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments 101 2nd TR Plain 102 2nd TR Labels 103 2nd TR Thick 104 2nd TRExtraThk 105 2nd TR Envelop 107 2nd TR Coated1 108 2nd TR Coated2 109 2nd TR 1200 Adjusts the density and image granularity for 600dpi printing (for plain paper, labels, thick paper, extra-thick paper, envelopes, coated 1 and coated 2), and 1200 dpi printing (for all paper types). The image becomes darker as the value increases.

This setting is used when doing single-sided printing or printing on the back side of the sheet of paper for duplex printing. Settings (default in bold): -8 ... 0 ... 7 (step 1) 111 2ndTR Plain 2 113 2ndTR Thick 2 114 2ndTRExtraThk2 117 2ndTRCoated1 2 118 2ndTR Coated2 2 119 2ndTR 1200 2 Adjusts the density and image granularity for 600dpi printing (for plain paper, thick paper, extra-thick paper, coated 1 and coated 2), and 1200 dpi printing (for all paper types). The image becomes darker as the value increases. This setting is used when printing on the front side of a sheet of paper. Settings (default in bold): -8 ... 0 ...

7 (step 1) 151 Temp Plain 153 Temp Thick 155 Temp Envelope Adjusts the temperature at which toner fixes to plain paper, thick paper and envelopes. The setting becomes cooler as the values decreases. Note that printouts may curl more as the value increases. Settings (default in bold): -10, -5, 0 160 Fuser Control Select 1 if the fluorescent light flickers when printing. Settings (default in bold): 0: On (for 220-240V model), Off (for 110-120V model) 1: On 2: Off 201 Highland Adjust this setting if black dots appear on the printed page when using the printer in locations at high altitudes.

See the table below and select a suitable value according to the location in which the printer is being used. Increasing the value makes the printer more suited for higher altitudes. For the altitudes at which this printer can be operated, see “Environmental” on page 89. Settings (default in bold): 0 ... 6