cisco Catalyst 9300 — Configuring Wired Dynamic PVLAN

Purpose Command or Action template will be removed from the port after the configured keep time. Example: Device(config-if)# access-session Note interface-template sticky timer 60 It is recommended that you set the sticky timer to 60 seconds. Step 17 Returns to privileged EXEC mode. end Example: Device(config-if)# end What to do next After the above steps, configure the Identity Services Engine (ISE) or any other RADIUS server to assign the template to the client’s port interface after the client has been authenticated successfully. Configuring Wired Dynamic PVLAN Configuring Wired Dynamic PVLAN VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 110