Figure 8: Configuring the ISE to Assign the Interface Template If you are using the ISE, go to the Policy > Policy Elements > Authorization > Authorization Profile page. Check the Interface Template check box and enter the name of the template to be assigned to the client interface. If you are using a different RADIUS server, the attribute Cisco-AVpair="interface:template=name" must be pushed to the switch after the initial client authentication has been completed. Configuring Wired Dynamic PVLAN Configuring Wired Dynamic PVLAN VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 111