ignored (cleared), and the VTP and VLAN configurations in the startup configuration file are used. The VLAN database revision number remains unchanged in the VLAN database. • If the VTP mode or domain name in the startup configuration do not match the VLAN database, the domain name and VTP mode and configuration for VLAN IDs 1 to 1005 use the VLAN database information. Domain Names for Configuring VTP When configuring VTP for the first time, you must always assign a domain name. You must configure all devices in the VTP domain with the same domain name.
Devices in VTP transparent mode do not exchange VTP messages with other devices, and you do not need to configure a VTP domain name for them. If the NVRAM and DRAM storage is sufficient, all devices in a VTP domain should be in VTP server mode. Note Caution Do not configure a VTP domain if all devices are operating in VTP client mode. If you configure the domain, it is impossible to make changes to the VLAN configuration of that domain. Make sure that you configure at least one device in the VTP domain for VTP server mode. Passwords for the VTP Domain You can configure a password for the VTP domain, but it is not required.
If you do configure a domain password, all domain devices must share the same password and you must configure the password on each device in the management domain. Devices without a password or with the wrong password reject VTP advertisements. If you configure a VTP password for a domain, a device that is booted without a VTP configuration does not accept VTP advertisements until you configure it with the correct password. After the configuration, the device accepts the next VTP advertisement that uses the same password and domain name in the advertisement.
If you are adding a new device to an existing network with VTP capability, the new device learns the domain name only after the applicable password has been configured on it. When you configure a VTP domain password, the management domain does not function properly if you do not assign a management domain password to each device in the domain. Caution VTP Version Follow these guidelines when deciding which VTP version to implement: • All devices in a VTP domain must have the same domain name, but they do not need to run the same VTP version.
• A VTP version 2-capable device can operate in the same VTP domain as a device running VTP version 1 if version 2 is disabled on the version 2-capable device (version 2 is disabled by default). Configuring VTP Domain Names for Configuring VTP VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 8