cisco Catalyst 9300 — Configuring a VTP Version 3 Primary Server

Configuring a VTP Version 3 Primary Server When you configure a VTP server as a VTP primary server, the takeover operation starts. Configuring VTP Configuring a VTP Version 3 Primary Server Command or Action Purpose Step 3 vtp version 3 Example: Device(config)# vtp version 3 Enables VTP version 3 on the device. The default is VTP version 1. Step 4 vtp password password [hidden | secret] Example: Device(config)# vtp password mypassword hidden (Optional) Sets the password for the VTP domain. The password can be 8 to 64 characters. • (Optional) hidden: Saves the secret key generated from the password string in the nvram:vlan.dat file.

If you configure a takeover by configuring a VTP primary server, you are prompted to reenter the password. • (Optional) secret: Directly configures the password. The secret password must contain 32 hexadecimal characters. Step 5 end Example: Device(config)# end Returns to privileged EXEC mode. Step 6 show vtp password Example: Device# show vtp password Verifies whether the VTP password is configured or not. Step 7 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 12