cisco Catalyst 9300 — Configuring a VTP Version 3 Password

Configuring a VTP Version 3 Password You can configure a VTP version 3 password on the device. Procedure Configuring VTP Configuring a VTP Version 3 Password Command or Action Purpose • unknown—An unknown database type. Step 5 vtp password password Example: Device(config)# vtp password mypassword (Optional) Sets the password for the VTP domain. The password can be 8 to 64 characters. If you configure a VTP password, the VTP domain does not function properly if you do not assign the same password to each device in the domain. Step 6 end Example: Device(config)# end Returns to privileged EXEC mode. Step 7 show vtp status Example:

Device# show vtp status Verifies your entries in the VTP Operating Mode and the VTP Domain Name fields of the display. Step 8 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves the configuration in the startup configuration file. Only VTP mode and domain name are saved in the device running configuration and can be copied to the startup configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode.

VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 11