• VTP client mode—In VTP client mode, you cannot change its VLAN configuration. The client device receives VTP updates from a VTP server in the VTP domain and then modifies its configuration accordingly. • VTP transparent mode—In VTP transparent mode, VTP is disabled on the device. The device does not send VTP updates and does not act on VTP updates received from other devices. However, a VTP transparent device running VTP version 2 does forward received VTP advertisements on its trunk links. • VTP off mode—VTP off mode is the same as VTP transparent mode except that VTP advertisements are not forwarded.
When you configure a domain name, it cannot be removed; you can only reassign a device to a different domain. Procedure Configuring VTP Configuring VTP Mode Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 vtp domain domain-name Example: Device(config)# vtp domain eng group _ Configures the VTP administrative-domain name. The name can be 1 to 32 characters. All devices operating in VTP server or client mode under the same administrative responsibility must be configured with the same domain name.
This command is optional for modes other than server mode. VTP server mode requires a domain name. If the device has a trunk connection to a VTP domain, the device learns the domain name from the VTP server in the domain. You should configure the VTP domain before configuring other VTP parameters. Step 4 vtp mode {client | server | transparent | off} {vlan | mst | unknown} Example: Device(config)# vtp mode server Configures the device for VTP mode (client, server, transparent, or off). • vlan—The VLAN database is the default if none are configured. • mst—The multiple spanning tree (MST) database. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 10