cisco Catalyst 9300 — Adding a VTP Client to a VTP Domain

Configuring VTP Adding a VTP Client to a VTP Domain Command or Action Purpose Device# configure terminal Step 4 vtp domain domain-name Example: Device(config)# vtp domain domain123 Changes the domain name from the original one displayed in Step 1 to a new name. Step 5 end Example: Device(config)# end Returns to privileged EXEC mode. The VLAN information on the device is updated and the configuration revision number is reset to 0. Step 6 show vtp status Example: Device# show vtp status Verifies that the configuration revision number has been reset to 0. Step 7 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 8 vtp domain domain-name Example:

Device(config)# vtp domain domain012 Enters the original domain name on the device. Step 9 end Example: Device(config)# end Returns to privileged EXEC mode. The VLAN information on the device is updated. Step 10 show vtp status Example: Device# show vtp status (Optional) Verifies that the domain name is the same as in Step 1 and that the configuration revision number is 0. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 18