If the number of VLANs on the device exceeds the number of supported spanning-tree instances, we recommend that you configure the IEEE 802.1s Multiple STP (MSTP) on your device to map multiple VLANs to a single spanning-tree instance. Extended-Range VLAN Configuration Guidelines Extended-range VLANs are VLANs with IDs from 1006 to 4094. Follow these guidelines when creating extended-range VLANs: • VLAN IDs in the extended range are not saved in the VLAN database and are not recognized by VTP unless the device is running VTP version 3. • You cannot include extended-range VLANs in the pruning eligible range.
• For VTP version 1 or 2, you can set the VTP mode to transparent in global configuration mode. You should save this configuration to the startup configuration so that the device boots up in VTP transparent mode. Otherwise, you lose the extended-range VLAN configuration if the device resets. If you create extended-range VLANs in VTP version 3, you cannot convert to VTP version 1 or 2. • In a switch stack, the whole stack uses the same running configuration and saved configuration, and extended-range VLAN information is shared across the stack. How to Configure VLANs The following sections provide information about configuring Normal-Range VLANs and Extended-Range VLANs:
How to Configure Normal-Range VLANs You can set these parameters when you create a new normal-range VLAN or modify an existing VLAN in the VLAN database: • VLAN ID • VLAN name • VLAN type • Ethernet • Fiber Distributed Data Interface [FDDI] • FDDI network entity title [NET] • TrBRF or TrCRF • Token Ring • Token Ring-Net • VLAN state (active or suspended) • Security Association Identifier (SAID) Configuring VLANs Extended-Range VLAN Configuration Guidelines VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 26