Where to Go Next After configuring VLANs, you can configure the following: • VLAN Trunking Protocol (VTP) • VLAN trunks • Private VLANs • Voice VLANs Configuring VLANs Where to Go Next Command Purpose show vlan [ access-map name | brief | dot1q { tag native } | filter [ access-map | vlan ] | group [ group-name name ] | id vlan-id | ifindex | mtu | name name | private-vlan remote-span | summary ] Displays parameters for all VLANs or the specified VLAN on the device. The following command options are available: • access-map—Displays the VLAN access-maps. • brief—Displays VTP VLAN status in brief. • dot1q—Displays the dot1q parameters. • filter—Displays VLAN filter information.
• group—Displays the VLAN group with its name and the connected VLANs that are available. • id—Displays VTP VLAN status by identification number. • ifindex—Displays SNMP ifIndex. • mtu—Displays VLAN MTU information. • name—Displays the VTP VLAN information by specified name. • private-vlan—Displays private VLAN information. • remote-span–Displays the remote SPAN VLANs. • summary—Displays a summary of VLAN information. Note The private-vlan command option that appears in the device CLI is not supported. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 34