cisco Catalyst 9300 — Feature History for VLAN

Additional References Related Documents Standards and RFCs Feature History for VLAN This table provides release and related information for features explained in this module. These features are available on all releases subsequent to the one they were introduced in, unless noted otherwise. Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/ . Configuring VLANs Additional References Related Topic Document Title For complete syntax and usage information for the commands used in this chapter.

Command Reference (Catalyst 9300 Series Switches) Standard/RFC Title RFC 1573 Evolution of the Interfaces Group of MIB-II RFC 1757 Remote Network Monitoring Management RFC 2021 SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2 Release Feature Feature Information Cisco IOS XE Everest 16.5.1a VLAN A VLAN is a switched network that is logically segmented by function, project team, or application, without regard to the physical locations of the users. VLANs have the same attributes as physical LANs, but you can group end stations even if they are not physically located on the same LAN segment.

Cisco IOS XE Gibraltar 16.11.1 Support for increased number of spanning tree instances. Starting with this release, in PVST+ or Rapid PVST+ mode, the device or device stack supports up to 256 spanning-tree instances. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 35