cisco Catalyst 9300 — Configuring Load Sharing Using STP Port Priorities

Configuring VLAN Trunks Configuring Load Sharing Using STP Port Priorities Command or Action Purpose Step 3 vtp domain domain-name Example: Device(config)# vtp domain workdomain Configures a VTP administrative domain. The domain name can be 1 to 32 characters. Step 4 vtp mode server Example: Device(config)# vtp mode server Configures Device A as the VTP server. Step 5 end Example: Device(config)# end Returns to privileged EXEC mode. Step 6 show vtp status Example: Device# show vtp status Verifies the VTP configuration on both Device A and Device B. In the display, check the VTP Operating Mode and the VTP Domain Name fields. Step 7 show vlan Example:

Device# show vlan Verifies that the VLANs exist in the database on Device A. Step 8 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 9 interface interface-id Example: Device(config)# interface gigabitethernet1/0/1 Defines the interface to be configured as a trunk, and enters interface configuration mode. Step 10 switchport mode trunk Example: Device(config-if)# switchport mode trunk Configures the port as a trunk port. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 56