• Dynamic Trunking Protocol (DTP) • IP Source Guard • IPv6 First Hop Security (FHS) • IPv6 Security Group (SG) • Multicast VLAN Registration (MVR) • Voice VLAN • Web Cache Communication Protocol (WCCP) • Port Aggregation Protocol (PAgP) and Link Aggregation Control Protocol (LACP) are supported only for Private VLAN promiscuous trunk ports and Private VLAN isolated trunk ports. • You can configure IEEE 802.1x port-based authentication on a private-VLAN port, but do not configure 802.1x with port security, voice VLAN, or per-user ACL on private-VLAN ports. • A private-VLAN host or promiscuous port cannot be a SPAN destination port.
If you configure a SPAN destination port as a private-VLAN port, the port becomes inactive. • If you configure a static MAC address on a promiscuous port in the primary VLAN, you need not add the same static address to all associated secondary VLANs. Similarly, if you configure a static MAC address on a host port in a secondary VLAN, you need not add the same static MAC address to the associated primary VLAN. Also, when you delete a static MAC address from a private-VLAN port, you do not have to remove all instances of the configured MAC address from the private VLAN. Note Dynamic MAC addresses learned in the secondary VLAN of a private VLAN are replicated to the primary VLANs.
All MAC entries are learnt on secondary VLANs, even if the traffic ingresses from primary VLAN. If a MAC address is dynamically learnt in the primary VLAN, it is not replicated in the associated secondary VLANs. • Configure Layer 3 VLAN interfaces (switch value interfaces) only for primary VLANs. • Private VLAN configured with MACsec or Virtual Private LAN Services (VPLS) or Cisco Software-Defined Access solution on the same VLAN does not work. Information About Private VLANs The following sections provide information about Private VLANs: Private VLAN Domains The private VLAN feature addresses two problems that service providers face when using VLANs:
• When running the Network Essentials or Network Advantage license, the device supports up to 4094 active VLANs. If a service provider assigns one VLAN per customer, this limits the numbers of customers the service provider can support. Configuring Private VLANs Information About Private VLANs VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 64