cisco Catalyst 9300 — Isolated Private VLAN Trunk Ports

Isolated Private VLAN Trunk Ports You use isolated PVLAN trunk ports if you anticipate using PVLAN isolated host ports to carry multiple VLANs, either normal VLANs or multiple PVLAN domains. You can connect a downstream switch that does not support PVLANs, such as a Catalyst 2950. Figure 6: Isolated PVLAN Trunk Ports In this illustration, a Catalyst 9k switch connects to a downstream switch that does not support PVLANs. Traffic being sent in the downstream direction towards host1 from the router is received by the Catalyst 9k series switch on the promiscuous port and in the primary VLAN (VLAN 10).

The packets are then switched out of the isolated PVLAN trunk; instead of being tagged with the primary VLAN (VLAN 10) they are transmitted with the isolated VLAN’s tag (VLAN 11). When the packets arrive on the non-PVLAN switch, they can be bridged to the destination hosts’ access port. Configuring Private VLANs Isolated Private VLAN Trunk Ports VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 68