Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

SUMMARY OF SPRITE REGISTERS There are eight complete sets of registers used to describe the sprites. Each set consists of five registers. Only the registers for sprite O are described here. All of the others are the same, except for the name of the register, which includes the appropriate number. POINTERS Pointers are registers that are used by the system to point to the current data being used. During screen display, the registers are incremented to point to the data being used as the screen display progresses. Therefore, pointer registers must be freshly written during the start of the vertical blanking period.

SPR0PTH and SPR0PTL This pair of registers contains the 32-bit word address of Sprite 0 DMA data. Pointer register names for the other sprites are: SPR1PTH SPR1PTL SPR2PTH SPR2PTL SPR3PTH SPR3PTL SPR4PTH SPR4PTL SPRSPTH SPRSPTL SPR6PTH SPR6PTL SPR7PTH SPR7PTL CONTROL REGISTERS SPR0POS This is the sprite 0 position register. The word written into this register controls the position on the screen at which the upper left-hand corner of the sprite is to be placed. The most significant bit of the first data word will be placed in this position on the screen. - 124 Sprite Hardware -