Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

NOTE The sprites have a placement resolution on a full screen of 320 by 200 NTSC (320 by 256 PAL). The sprite resolution is independent of the bit-plane resolution. BIT POSITIONS: o Bits 15-8 specify the vertical start position, bits V7 - V0. o Bits 7-0 specify the horizontal start position, bits H8 - H1. NOTE This register is normally only written by the lsprite DMA channel itself. See the details above regarding the organization of the sprite data. This register is usually updated directly by DMA. SPR0CTL This register is normally used only by the sprite DMA channel. It contains control information that is used to control the sprite data-fetch process. Bit positions:

o Bits 15-8 specify vertical stop position for a sprite image, bits V7 - V0. o Bit 7 is the attach bit. This bit is valid only for odd-numbered sprites. It indicates that sprites 0, 1 (or 2,3 or 4,5 or 6,7) will, for color interpretation, be considered as paired, and as such will be called four bits deep. The odd-numbered (higher number) sprite contains bits with the higher binary significance. During attach mode, the attached sprites are normally moved horizontally and vertically together under processor control. This allows a greater selection of colors within the boundaries of the sprite itself.

The sprites, although attached, remain capable of independent motion, however, and they will assume this larger color set only when their edges overlay one another. o Bits 6-3 are reserved for future use (make zero). o Bit 2 is bit V8 of vertical start. o Bit 1 is bit V8 of vertical stop. o Bit 0 is bit H0 of horizontal start. - Sprite Hardware 125 -