Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

^ /|\ | | 0 db |____ | \ | \ Filter response | \ -30 db |_______\_________________________________\ | | | | | | / 05 10 15 20 25 30 KHz Filter passes all frequencies below about 5KHz Figure 5-5: Frequency Domain Plot of Low-Pass Filter Figure 5-6 shows that it is permissible to use a 12 KHz sampling rate to produce a 4 KHz waveform. Both of the beat frequencies are outside the range of the filter, as shown in these calculations: 12+4= 16KHz 12-4= 8KHz ^ Filter response /|\ | 12 KHz sampling frequency | | 0 db |____ | | \ Diff. | Sum | \ | | | | 4| \ | | | -30 db |____|__\_|___|_____|_____________________\ / | | | | | | / / 05 10 15 20 25 30 / KHz / Desired output frequency Figure 5-6:

Noise-free Output (No Aliasing Distortion) You can see in Figure 5-7 that is unacceptable to use a 10 KHz sampling rate to produce a 4 KHz waveform. One of the beat frequencies (10 - 4) is within the range of the filter, allowing some of that undesirable frequency to show up in the audio output. - Audio Hardware 151 -