AUDxLCH 0A0 W A Audio channel x location (high 3 bits) AUDxLCL 0A2 W A Audio channel x location (low 15 bits) This pair of registers contains the 18 bit starting address (location) of audio channel x (x=0,1,2,3) DMA data. This is not a pointer register and therefore needs to be reloaded only if a different memory location is to be outputted. AUDxLEN 0A4 W P Audio channel x length This register contains the length (number of words) of audio channel x DMA data. AUDxPER 0A6 W P Audio channel x Period This register contains the period (rate) of audio channel x DMA data transfer. The minimum period is 12 color clocks.
This means that the smallest number that should be placed in this register is 124 decimal. This corresponds to a maximum sample frequency of 28.86 kHz. AUDxVOL 0A8 W P Audio channel x volume This register contains the volume setting for audio channel x. Bits 6,5,4,3,2,1,0 specify 65 linear volume levels as shown below.
Bit# Use -------------------------------------------------- 15-07 Not used 06 Forces volume to max (64 ones, no zeros) 05-00 Sets one of 64 levels (000000-no output (111111-63 19, one 0) BLTAFWM 044 W A Blitter first-word mask for source A BLTALWM 046 W A Blitter last-word mask for source A The patterns in these two registers are ANDed with the first and last words of each line of data from source A into the blitter. A zero in any bit override data from source A. These registers should be set to all 1's for fill mode or for line-drawing mode. - 260 Appendix A -