COPINS (cont.) There are two indirect jump registers, COP1LC and COP2LC. These are 18- bit pointer registers whose contents are used to modify the program counter for initialization or jumps. They are transferred to the program counter whenever strobe addresses COPJMP1 or COPJMP2 are written. In addition, COP1LC is automatically used at the beginning of each vertical blank time. It is important that one of the jump registers be initialized and its jump strobe address hit after power-up but before Copper DMA is initialized. This insures a determined startup address and state.
COPJMP1 088 5 A Copper restart at first location COPJMP2 08A 5 A Copper restart at second location These addresses are strobe addresses. When written to, they cause the Copper to jump indirect using the address contained in the first or second location registers described below. The Copper itself can write to these addresses, causing its own jump indirect. - 270 Appendix A -