DDFSTOP 094 W A Display data fetch stop (horiz. position) DDFSTRT 092 W A Display data fetch start (horiz. position) These registers control the horizontal timing of the beginning and end of the bit plane DMA display data fetch. The vertical bit plane DMA timing is identical to the display windows described above. The bit plane modules are dependent on the bit plane horizontal size and on this data-fetch window size.
Register bit assignment BIT 15,14,13,12,11,10,09,08,07,06,05,04,03,02,01,00 --------------------------------------------------- USE X X X X X X X X H8 H7 H6 H5 H4 H3 X X (X bits should always be driven with 0 to maintain upward compatibility) The Tables below show the start and stop timing for different register contents.
DDFSTRT (left edge of display data fetch) PURPOSE H8,H7,H6,H5,H4 --------------------------------- Extra wide (max) * 0 0 1 0 1 Wide 0 0 1 1 0 Normal 0 0 1 1 1 Narrow 0 1 0 0 0 DDFSTOP (right edge of display data fetch) PURPOSE H8,H7,H6,H5,H4 --------------------------------- Narrow 1 1 0 0 1 Normal 1 1 0 1 0 Wide (max) 1 1 0 1 1 DIWSTOP 090 W A Display window stop (lower right vertical-horizontal position) DIWSTRT 08E W A Display window start (upper left vertical-horizontal position) These registers control display window size and position by locating the upper left and lower right corners.
BIT 15,14,13,12,11,10,09,08,07,06,05,04,03,02,01,00 --------------------------------------------------- USE V7 V6 V5 V4 V3 V2 V1 V0 H7 H6 H5 H4 H3 H2 H1 H0 DIWSTRT is vertically restricted to the upper 2/3 of the display (V8=0) and horizontally restricted to the left 3/4 of the display (H8=0). DIWSTOP is vertically restricted to the lower 1/2 of the display (V8=/V7) and horizontally restricted to the right 1/4 of the display (H8=1).