Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

The video beam produces about 262 video lines from top to bottom, of which 200 normally are visible on the screen with an NTSC system. With a PAL system, the beam produces 312 lines, of which 256 are normally visible. Each complete set of lines (262/NTSC or 312/PAL) is called a display field. The field time, i.e. the time required for a complete display field to be produced, is approximately 1/60th of a second for an NTSC system and approximately 1/50th of a second for PAL. Between display fields, the video beam traverses the lines that are not visible on the screen and returns to the top of the screen to produce another display field. The display area is defined as a grid of pixels.

A pixel is a single picture element, the smallest addressable part of a screen display. The drawings below show what a pixel is and how pixels form displays. _______________________ | _ | | |_| | _ | elements. Each element is called | _|_|_ | a pixel. | |_|_|_| | | |_|_|_| |_______________________| larger graphic objects. ___________________________ ____________________________ | | | | | | | | | | | | | | | | | | | | | | | | | | | | |___________________________| |____________________________| In normal resolution mode, In high resolution mode, 320 pixels fill a horizontal 640 pixels fill a horizontal line. line. Figure 3-2: What Is a Pixel?

The Amiga offers a choice in both horizontal and vertical resolutions. Horizontal resolution can be adjusted to operate in low resolution or high resolution mode. Vertical resolution can be adjusted to operate in interlaced or non-interlaced mode. - Playfield Hardware 35 -