Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

o In low-resolution mode, the normal playfield has a width of 320 pixels. o High-resolution mode gives finer horizontal resolution 640 pixels in the same physical display area. o In non-interlaced mode, the normal NTSC playfield has a height of 200 video lines. The normal mal PAL screen has a height of 256 video lines. o Interlaced mode gives finer vertical resolution 400 lines in the same physical display area in NTSC and 512 for PAL. These modes can be combined, so you can have, for instance, an interlaced, high- resolution display. Note that the dimensions referred to as "normal" in the previous paragraph are nominal dimensions and represent the normal values you should expect to use.

Actually, you can display larger playfields; the maximum dimensions are given in the section called "Bit- Planes and Playfields of All Sizes." Also, the dimensions of the playfield in memory are often larger than the playfield displayed on the screen. You choose which part of this larger memory picture to display by specifying a different size for the display window. A playfield taller than the screen can be scrolled, or moved smoothly, up or down. A playfield wider than the screen can be scrolled horizontally, from left to right or right to left.

Scrolling is described in the section called "Moving (Scrolling) Playfields." In the Amiga graphics system, you can have up to thirty-two different colors in a single playfield, using normal display methods. You can control the color of each individual pixel in the playfield display by setting the bit or bits that control each pixel. A display formed in this way is called a bit-mapped display. For instance, in a two-color display, the color of each pixel is determined by whether a single bit is on or off. If the bit is 0, the pixel is one user-defined color, if the bit is 1, the pixel is another color. For a four-color display, you build two bit-planes in memory.

When the playfield is displayed, the two bit-planes are overlapped, which means that each pixel is now two bits deep. You can combine up to five bit-planes in this way. Displays made up of three, four, or five bit-planes allow a choice of eight, sixteen, or thirty-two colors, respectively. The color of a pixel is always determined by the binary combination of the bits that define it. When the system combines bit-planes for display, the combination of bits formed for each pixel corresponds to the number of a color register. This method of colouring pixels is called color indirection.

The Amiga has thirty-two color registers, each containing bits defining a user selected color (from a total of 4,096 possible colors). Figure 3-3 shows how the combination of up to five bit-planes forms a code that selects which one of the thirty-two registers to use to display the color of a playfield pixel. - 36 Playfield Hardware -