o Genlock audio is disabled. o Light pen is disabled. o Interlaced mode is disabled. o External resynchronization is disabled. (genlock) SELECTING HORIZONTAL AND VERTICAL RESOLUTION Standard home television screens are best suited for low-resolution displays. Low- resolution mode provides 320 pixels for each horizontal line. High-resolution monochrome and RGB monitors can produce displays in high-resolution mode, which provides 640 pixels for each horizontal line. If you define an object in low-resolution mode and then display it in high-resolution mode, the object will be only half as wide. To set horizontal resolution mode, you write to bit 15, HIRES, in register BPLCON0:
High-resolution modewrite 1 to bit 15. Low-resolution modewrite 0 to bit 15. Note that in high-resolution mode, you can have up to four bit-planes in the playfield and, therefore, up to 16 colors. Interlaced mode allows twice as much data to be displayed in the same vertical area as in non-interlaced mode. This is accomplished by doubling the number of lines appearing on the video screen. The following Table shows the number of lines required to fill a normal, non-overscan screen. Table 3-6:
Lines in a Normal Playfield NTSC PAL ----------------------- Non-interlaced 200 256 Interlaced 400 512 In interlaced mode, the scanning circuitry vertically offsets the start of every other field by half a scan line. - Playfield Hardware 43 -