Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

Table 3-8: Playfield Memory Requirements, PAL Number of Bytes Picture Size Modes per Bit-Plane 320 X 256 Low-resolution, 8,192 non-interlaced 320 X 512 Low-resolution, 16,384 interlaced 640 X 256 High-resolution, 16,384 non-interlaced 640 X 512 High-resolution, 32,768 interlaced NTSC EXAMPLE OF BIT PLANE SIZE For example, using a normal, NTSC, low-resolution, non-interlaced display with 320 pixels across each display line and a total of 200 display lines, each line of the bit-plane requires 40 bytes (320 bits divided by 8 bits per byte = 40). Multiply the 200 lines times 40 bytes per line to get 8,000 bytes per bit-plane as given above.

A low-resolution, non-interlaced playfield made up of two bit-planes requires 16,000 bytes of memory area. The memory for each bit-plane must be continuous, so you need to have two 8,000-byte blocks of available memory. Figure 3-7 shows an 8,000-byte memory area organized as 200 lines of 40 bytes each, providing 1 bit for each pixel position in the display plane. - Playfield Hardware 47 -