Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

d. Specify resolution: o Low resolution: * 320 pixels in each horizontal line. * Clear bit 15 in register BPLCON0 (HIRES). o High resolution: * 640 pixels in each horizontal line. * Set bit 15 in register BPLCON0 (HIRES). e. Specify interlaced or non-interlaced mode: o Interlaced mode: * 400 vertical lines for NTSC, 512 for PAL. * Set bit 2 in register BPLCON0 (LACE). o Non-interlaced mode: * 200 vertical lines for NTSC, 256 for PAL. * Clear bit 2 in BPLCON0 (LACE). 2. Allocate Memory. To calculate data-bytes in the total bit-planes, use the following formula: Bytes per line * lines in playfield * number of bit-planes 3. Define Size of Display Window.

o Write start position of display window in DIWSTRT: * Horizontal position in bits 0 through 7 (low-order bits). * Vertical position in bits 8 through 15 (high-order bits). o Write stop position of display window in DIWSTOP: * Horizontal position in bits 0 through 7. * Vertical position in bits 8 through 15. - Playfield Hardware 58 -