Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

Data for Line 2: Location: START+80 START+82 START+84... START+118 Leftmost Next Word Next Word Last Display Display Word Word Figure 3-16: Data Fetch for the Second Line When Modulo = 40 To display the right half of the big picture, you set up a vertical blanking routine to start the bit-plane pointers at location START+40 rather than START with the modulo remaining at 40. The data layout is shown in Figures 3-17 and 3-18. Data for Line 1: Location START+40 START+42 START-44... START+78 Leftmost Next Word Next Word Last Display Display Word Word Figure 3-17: Data Layout for First Line Right Half of Big Picture Now, the bit-plane pointers contain the value START+80.

The modulo (40) is added to the pointers so that when they begin the data fetch for the second line, the correct data is fetched. Data for Line 2: Location: START+120 START+122 START+124... START+158 Leftmost Next Word Next Word Last Display Display Word Word Figure 3-18: Data Layout for Second Line Right Half of Big Picture Remember, in high-resolution mode, you need to fetch twice as many bytes as in low- resolution mode. For a normal-sized display, you fetch 80 bytes for each horizontal line instead of 40. - 70 Playfield Hardware -