Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

SPECIFYING THE DATA FETCH The data-fetch registers specify the beginning and end positions for data placement on each horizontal line of the display. You specify data fetch in the same way as shown in the section called "Forming a Basic Playfield." MEMORY ALLOCATION For larger memory pictures, you need to allocate more memory. Here is a formula for calculating memory requirements in general: bytes per line * lines in playfield * # of bit-planes Thus, if the wide playfield described in this section is formed from two bit-planes, it requires: 80 * 200 * 2 = 32,000 bytes of memory Recall that this is the memory requirement for the playfield alone.

You need more memory for any sprites, animation, audio, or application programs you are using. SELECTING THE DISPLAY WINDOW STARTING POSITION The display window starting position is the horizontal and vertical co-ordinates of the upper left-hand corner of the display window. One register, DIWSTRT, holds both the horizontal and vertical coordinates, known as HSTART and VSTART. The eight bits allocated to HSTART are assigned to the first 256 positions, counting from the leftmost possible position. Thus, you can start the display window at any pixel position within this range. - Playfield Hardware 71 -