Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

is shown and the picture scrolls downward. On an NTSC system, with a display that has 200 vertical lines, each step can be as little as 1/200th of the screen. In interlaced mode each step could be 1/400th of the screen if clever manipulation of the pointers is used, but it is recommended that scrolling be done two lines at a time to maintain the odd/even field relationship. Using a PAL system with 256 lines on the display, the step can be 1/256th of a screen, or 1/512th of a screen in interlace. Figure 3-23:

Vertical Scrolling To set up a playfield for vertical scrolling you need to form bit-planes tall enough to allow for the amount of scrolling you want, write software to calculate the bit-plane pointers for the scrolling you want, and allow for the Copper to use the resultant pointers. Assume you wish to scroll a playfield upward one line at a time. To accomplish this, before each field is displayed, the bit-plane pointers have to increase by enough to ensure that the pointers begin one line lower each time. For a normal-sized, low-resolution display in which the modulo is 0, the pointers would be incremented by 40 bytes each time. - 76 Playfield Hardware -