Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

MOVE.W #2000,d0 ; 2000 longwords per bit-plane MOVE.L #$21000,a1 ; Point a1 at bit-plane 1 MOVE.L #$23000,a2 ; Point a2 at bit-plane 2 MOVE.L #$25000,a3 ; Point a3 at bit-plane 3 MOVE.L #$27000,a4 ; Point a4 at bit-plane 4 MOVE.L #$29000,a5 ; Point a5 at bit-plane 5 MOVE.L #$2B000,a6 ; Point a6 at bit-plane 6 FPLLOOP:

MOVE.L #$55555555,(a1)+ ; Fill bit-plane 1 with $55555555 MOVE.L #$33333333,(a2)+ ; Fill bit-plane 2 with $33333333 MOVE.L #$0F0F0F0F,(a3)+ ; Fill bit-plane 3 with $0F0F0F0F MOVE.L #$00FF00FF,(a4)+ ; Fill bit-plane 4 with $00FF00FF MOVE.L #$CF3CF3CF,(a5)+ ; Fill bit-plane 5 with $CF3CF3CF MOVE.L #$3CF3CF3C,(a6)+ ; Fill bit-plane 6 with $3CF3CF3C DBRA d0,FPLLOOP ; Decrement counter & loop till done ; ; Set up a Copper list at $20000. ; ; NOTE: As with the bit planes, the copper list location should be allocated ; from the system MEMF_CHIP memory pool. ; MOVE.L #$20000,a1 ; Point al at Copper list dest LEA COPPERL(pc),a2 ; Point a2 at Copper list image CLOOP:

MOVE.L (a2),(a1)+ ; Move a long word CMPI.L #$FFFFFFFE,(a2)+ ; Check for end of Copper list BNE CLOOP ; Loop until entire Cop list moved ; ;Point Copper at Copper list ; MOVE.L #$20000,COP1LCH(a0) ; Load Copper jump register MOVE.W COPJMP1(a0),d0 ; Force load into Copper P.C. ; ; Start DMA. ; MOVE.W #$8380,DMACON(a0) ; Enable bit-plane and Copper DMA BRA ....next stuff to do ; ; Copper list for six bit-planes. Bit-plane 1 is at $21000; 2 is at $23000; ; 3 is at $25000; 4 is at $27000; 5 is at $29000; 6 is at $2B000. ; ; NOTE: These bit-plane addresses are for example purposes only. ; See note above. ; COPPERL:

DC.W BPL1PTH,$0002 ; Bit-plane 1 pointer = $21000 DC.W BPL1PTL,$1000 DC.W BPL2PTH,$0002 ; Bit-plane 2 pointer = $23000 DC.W BPL2PTL,$3000 DC.W BPL3PTH,$0002 ; Bit-plane 3 pointer = $25000 DC.W BPL3PTL,$5000 DC.W BPL4PTH,$0002 ; Bit-plane 4 pointer = $27000 DC.W BPL4PTL,$7000 DC.W BPL5PTH,$0002 ; Bit-plane 5 pointer = $29000 DC.W BPL5PTL,$9000 DC.W BPL6PTH,$0002 ; Bit-plane 6 pointer = $2B000 DC.W BPL6PTL,$B000 DC.W $FFFF,$FFFE ; Wait or the impossible, i.e., quit - Playfield Hardware 83 -