Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

FORMING A DISPLAY WITH SEVERAL DIFFERENT PLAYFIELDS The graphics library provides the ability to split the screen into several "ViewPorts", each with its own colors and resolutions. See the Amiga ROM Kernel Manual for more information. USING AN EXTERNAL VIDEO SOURCE An optional board that provides genlock is available for the Amiga. Genlock allows you to bring in your graphics display from an external video source (such as a VCR, camera, or laser disk player). When you use genlock, the background color is replaced by the display from this external video source. For more information, see the instructions furnished with the optional board.

SUMMARY OF PLAYFIELD REGISTERS This section summarizes the registers used in this chapter and the meaning of their bit settings. The color registers are summarized in the next section. See Appendix A for a summary of all registers. BPLCON0 - Bit Plane Control NOTE Bits in this register cannot be independently set. Bit 0 - unused Bit 1 - ERSY (external synchronization enable) 1 = External synchronization enabled (allows genlock synchronization to occur) 0 = External synchronization disabled Bit 2 - LACE (interlace enable) 1 = interlaced mode enabled 0 = non-interlaced mode enabled Bit 3 - LPEN (light pen enable) Bits 4-7 not used (make 0) - 84 Playfield Hardware -