Using Preferences 6-9 the number of horizontal lines that make up the Workbench screen. Save gadget. Then reset the Amiga to activate the new display. This doubles upper right comer of the screen) to On and then save the setting by selecting the To change the display to interlace mode, change this setting (which is in the Interlace n displayed when you inserted the original Workbench disk that came with the Amiga—select the Reset All gadget described below.) labeled Reset Colors. (To get back the original Workbench colors—the ones To get back the colors you had before you opened Preferences, select the gadget Try dragging the arrows in the sliders and watch how the color changes.
With a bit of practice, you'll be able to get the colors you want. H of red, green, and blue in the color by dragging the arrows along the sliders. colors it displays. To modify the color you've selected, you change the amount shown. Below these colors are three sliders labeled R, G. and B. These letters stand for red, green, and blue, the colors that the Amiga combines to create the With Preferences, you can change any of the four colors displayed by the Workbench. Start by selecting the color you want to change from the four colors Workbench Colors