Bridgeboard Expansion 3-3 Three of the Amiga bus expansion slots are in line with PC/AT compatible slot connectors, enabling the use of the Commodore Bridgeboard PC emulator boards and PC expansion boards in the Amiga. A Bridgeboard is a fully functional PC compatible computer with its own microprocessor, memory, and the circuitry needed to link the PC and Amiga systems. Since the Amiga is multitasking, an Amiga equipped with a Bridgeboard can run DOS and Windows programs at the same time as Amiga programs. A Bridgeboard is a full-length board that occupies both the lOO-pin Amiga bus connector and the 98-pin PC/AT connectors that are in line with it.
With a Bridgeboard installed, the other two slots with PC/AT connectors can accept most standard PCIXT and PC/AT drive controllers, VGAlSVGA video adapters, 110 boards, and other options for the Bridgeboard's use. With a Bridgeboard installed, the Amiga expansion slots that are in line with unoccupied PC/AT slots can still be used by Amiga expansion boards. The Amiga video expansion slot accommodates internal installation of graphics and video options. Using this slot keeps all video circuitry in the metal housing of the Amiga's main unit, helping to minimize RF interference problems.
The analog RGB output of the Amiga is compatible with worldwide television standards (both North American NTSC and European PAL). This makes the Amiga particularly well suited to video and multimedia options, such as a genlock, digitizer, composite encoder, or character generator. The video slot is in line with one Amiga bus expansion slot. This allows a video expansion board to incorporate, or be easily connected to, a standard Zorro IIIIII expansion board. This adds versatility, while enabling high-speed data transfer between the Amiga's main memory and a graphics output device. Bridgeboard Expansion Video Expansion