Commodore Amiga 4000 (A4000) — Commodore Amiga 4000 (A4000) User's Guide — Free Manual PDF Download

4-4 Adding Memory larger module. One-megabyte Chip RAM systems have a 1 MB module. By removing this module and inserting a 2 MB module, Chip RAM increases to 2 megabytes. This yields the following Chip RAM configurations. A 1 MB module removed from the Chip RAM socket can be installed in an open Fast RAM socket if there are no 4 MB modules in the Fast RAM section. There are no jumpers to set when upgrading Chip RAM. 5. Insert the new SIMM carefully into the socket, as illustrated in Figure 4-2. Insert the connector edge of the module first, then press the opposite edge down and in to seat the module. SIMMs are notched to ensure proper orientation in the socket.

Be certain that each module is fully seated and locked into place by the tabs at either end of the socket. 1. Disconnect the Amiga and remove the cover, as described in Chapter 3. 2. Remove any expansion boards in the daughterboard slots. Table 4-2. Chip RAM configurations To install a SIMM in one of the RAM sockets: 4. Remove the existing SIMM if necessary. SIMM Size Installing Memory Modules 1 MB 2MB 3. Locate the proper SIMM socket. Amount of Chip RAM 2 megabytes 1 megabyte