4-6 Processor Options The A4000 CPU slot is located on the right side of the motherboard, as illustrated in Figure 4-1. The processor module occupies this slot, mounted horizontally parallel with the motherboard. The processor module contains the Motorola 68040 series microprocessor and associated circuitry. To make some modification to the processor module, such as replace the module, you must remove the module from the slot. You may need to remove the Amiga's faceplate and front drive bay assembly to reach the CPU slot. If so, see Chapter 6, "Front Bay Installation" in this manual for directions on how to do so.
The following sections discuss options related to the A4000 CPU slot, including: Removing and installing processor modules in the CPU slot. Replacing a 68EC040 microprocessor with a 68040. To remove a processor module, hook your fingers under the module at either end of the slot connector and lift, as illustrated in Figure 4- 3. Do not lift elsewhere on the processor module, or you may crack the module or its connector. t Figure 4-3. Removing processor module \\ Removing a Processor Module Processor Options