Chapter 6 Installing Optional Storage Devices This chapter discusses installation of additional internal storage devices in the Amiga, including floppy drives, hard drives, and other optional devices. The A4000 has front and rear drive bay areas. Either can be used for drives, but only the front bays have external access. A 40-wire ribbon cable is provided for installation of one or two IDE devices in the rear bays. A 34-wire ribbon cable is provided for installation of one or two Amiga floppy drives in the front bays. In the front of the main unit are a 3.5-inch drive area and a 5.25- inch drive area.
Both have external access, for devices such as floppy, tape, CD-ROM, and removable media drives that require it. The 5.25-inch bay accommodates one half-height (32 mm) drive. The 3.5-inch area accommodates either one half-height drive, or two low profile (1 inchl25 mm or less) drives. One of these bays is already occupied by the Amiga's internal floppy drive. The power supply wiring harness provides four 4-pin power connectors for front-mounted devices. Two are 3.5-inch floppy drive connectors and the other two are standard full-size connectors for tape drives or other devices. Drive Bays Front Bays