Verifying the Application-Hosting Configuration Use these show commands to verify the configuration. These commands can be used in any order. SUMMARY STEPS 1. enable 2. show iox-service 3. show app-hosting detail 4. show app-hosting device 5. show app-hosting list 6. show interfaces trunk 7. show controller ethernet-controller AppGigabitEthernet interface-number DETAILED STEPS Procedure Step 1 enable Enables privileged EXEC mode. • Enter your password if prompted. Example: Device> enable Step 2 show iox-service Displays the status of all the Cisco IOx services. Example: Device# show iox-service IOx Infrastructure Summary: --------------------------- IOx service (CAF) :
Not Running IOx service (HA) : Not Running IOx service (IOxman) : Not Running IOx service (Sec storage) : Not Running Libvirtd : Running Dockerd : Not Running Application DB Sync Info : Not available Step 3 show app-hosting detail Displays detailed information about the application. Application Hosting Verifying the Application-Hosting Configuration Command or Action Purpose Device(config-app-hosting)# end Application Hosting 32