Application Hosting Enabling Multicast Routing on the AppGigabitEthernet Interface Command or Action Purpose Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 app-hosting appid name Example: Device(config)# app-hosting appid iox app _ Configures an application and enters application-hosting configuration mode. Step 4 app-vnic AppGigabitEthernet trunk Example: Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Configures a trunk port as the front-panel port for an application, and enters application-hosting trunk-configuration mode. Step 5 vlan vlan-ID guest-interface guest-interface-number Example:
Device(config-config-app-hosting-trunk)# vlan 10 guest-interface 2 Configures a VLAN guest interface and enters application-hosting VLAN-access IP configuration mode. Step 6 guest-ipaddressip-address netmask netmask Example: Device(config-config-app-hosting-vlan-access-ip)# guest-ipaddress 192.168.0.2 netmask 255.255.255.0 Configures a static IP address. Step 7 multicast Example: Device(config-config-app-hosting-vlan-access-ip)# multicast Enables multicast traffic forwarding on the AppGigabitEthernet interface. Step 8 exit Example:
Device(config-config-app-hosting-vlan-access-ip)# exit Exits application-hosting VLAN-access IP configuration mode and returns to application-hosting trunk-configuration mode Step 9 exit Example: Device(config-config-app-hosting-trunk)# exit Exits application-hosting trunk-configuration mode and returns to application-hosting configuration mode. Step 10 app-default-gateway ip-address guest-interface network-interface Example: Device(config-app-hosting)# app-default-gateway 172.19.0.23 guest-interface 0 Configures the default management gateway. Step 11 end Example: Exits application-hosting configuration mode and returns to privileged EXEC mode. Application Hosting 31