Chapter 5 Analog Input/Output Module AS06XA When the analog output signal changes, the system updates the value of the analog output according to the value set in the slope, as shown in the image below. Analog signal Time *The output conversion time and the input channel sampling cycle are the same. 5. Scale Range You can set the scale range when the format is floating-point. The analog output mode of a channel has a corresponding digital range. Digital values correspond to analog outputs sent by the module. For 5_ example, if the analog range is -10 V to +10 V, the digital range is -10.0 to +10.0, the HSP scale is 10.0, and the LSP scale is -10.0.
The digital values -10.0 to +10.0 correspond to the analog values -10 V to +10 V, as the example below shows. Analog value 10 V Rated output range -10 V -10.0 10.0 Digital value Scale range 5-19