Delta Electronics — 7.2.7 Control Mode

AS Series Module Manual : Group number : Module number : Channel number : Update PID parameters : Enable the PID algorithm : Target value (SV) : PID control mode : PID Auto/Manual mode : Manual/Auto output value : Range within which the auto tuning is not working : Proportional gain : Integral coefficient (sec.

or 1/sec) : Derivative coefficient (sec) : Derivate-action time constant (sec) : PID formula types : Calculation of the PID derivative error : PID forward/reverse direction : Range within which the error value is counted as 0 : Initial value compensation of integral calculus (for heating up) : Initial value compensation of integral calculus (for cooling down) : Manual output value : Feed forward output value : Sampling time : Output value (MV) : Present value : Accumulated integral value : Error code GROUP MODULE CH UPDATE PID_RUN SV PID_MODE PID_MAN MOUT_AUTO AUTO_DBW Kc_Kp Ti_Ki Td_Kd Tf PID_EQ PID_DE PID_DIR ERR_DBW ALPHA BETA MOUT BIAS CYCLE PV I_MV ERROR MV _7 7-20 Operand Data type Function Setting range Description GROUP DWORD/DINT Group number The RTD/TC module group number that is connected to the right side of PLC directly or connected to the remote module that acts as PLC, e.g.

the first connected module group is group number 1, the second connected module group is group number 2. Up to 15 module group can be connected and counted. MODULE DWORD/DINT Module number The module number that is connected to the right side of PLC directly or connected to the remote module that acts as PLC, e.g. the first connected module is module number 1, the second connected module is module number 2. Up to 32 modules can be