Delta Electronics — 8.2.5 Functions

AS Series Module Manual 8.2.5 Functions 1. Measuring net weight You can choose to measure either the net weight or the gross weight of an object. Net weight is the actual weight of a product without its package. The weight of a package is the tare weight. Gross weight is the total weight: net weight plus tare weight.  Tare weight: the weight of a package  Net weight: the weight of a product, that is, the actual weight of a product without its package _8  Gross weight: the total weight, that is, the net weight of a product plus the tare weight of its package  Gross weight=Net weight+Tare weight Example: a product weighs 10 kg, and the carton in which the product is packed weighs 0.2 kg.

The gross weight is 10.2 kg. Net weight = 10 kg Tare weight = 0.2 kg Gross weight = 10.2 kg 8-12 Item Function Description 1 Measuring net weight Various measuring modes to choose from 2 Stability check When an object is put on a load cell, you can check whether the present weight of the object is in a specified stability range. 3 Determining zero point If an object is removed from the load cell, no weight is measured. 4 Filter out weights Filter out the maximum or minimum weight measured or use an average weight for a more accurate value.

5 Multi-point adjustment There are as many as 20 points for adjustment 6 Theoretical calibration Calibration based on the output value of the sensor instead of the real weight calibration 7 Zero point tracking Zero point tracking 8 Limit detections for channels Save the maximum and minimum values for channels. 9 Records for channels Save the analog curves for channels.